Cooler Master Masterbox Lite 3.1 Unboxing

Features and Specifications

Above is the tech specs for Cooler Master’s Masterbox Lite 3.1 and we are delighted to see that even within this small chassis is room for today’s top of the line components. The front vent/reflective panel/possible 240 mm radiator area gives the consumer quite a bit of play when choosing components. That mixed with the 120mm exhaust fan port with a stock 120 mm fan in place, really give off the impression that Cooler Master knew what they were doing while designing the 3.1. We can see this chassis having no issues moving ample amounts of air for cooling. A two 2.5 drive bay box sits beside the standard PSU housing on the bottom. In the heart of the Lite 3.1 is where our mini ITX or micro ATX motherboard would call home. This compartment has an enormous amount of room in regards to GPU size with the max card length of 380mm.If one really wanted to they could make this smaller than average chassis into a real goliath. Cooler Master has once again done something extremely right in developing the 3.1.

Final Thoughts

If you are just starting out in the world of PC building and are looking for the biggest bang for your buck while saving space at the same time have we got the chassis for you. Not only does the Masterbox Lite 3.1 provide in looks, but in features as well. If you are looking for a warranty that is better than average, Cooler Master provides with a two years. This chassis took into account airflow, good looks and room for parts to the next level. We had very few issues when unboxing our 3.1 and in the end a small power reset switch on the IO is shadowed by all the good. Thus the 3.1 has earned our silver seal with an MSRP of 42.99USD.

CHECK OUT COOLER MASTER PRODUCTS HERE!!!!!!